KQ-419 · SCROLL/SMEAR
Scroll Smear
The interface smears with scroll velocity: scroll quickly and the page streaks vertically like a long exposure, stop and it snaps back sharp. The blur length is the measured velocity, decayed on the clock, so a flick leaves a tail and a slow scroll leaves none.
Fieldline · basin survey, week 6
Every transect the crew walked, in the order they walked it.
The crew covered the lower basin in six days, forty-one transects logged by hand and cross-checked against the probe readings that same evening. Nothing here is modeled; every number came out of the ground the same afternoon it went into this report.
Moisture held above eighteen percent through most of the western plots, dropping fast past transect five where the old drainage channel cuts under the ridge. Two readings near B-11 came back low enough that we walked the transect twice before writing them down.
Nine plots are flagged for a second pass, mostly where the soil color did not match what the probe reported. The rest cleared on the first walk and will not need the crew back before the spring count.
The second pass goes out Thursday, weather allowing. Everything below is what shipped with this write-up: the plots, the readings, and the two calls still waiting on a signature.
| Plot | Transect | Moisture | Status |
|---|---|---|---|
| A-04 | T2 | 18.6% | surveyed |
| A-07 | T2 | 21.1% | flagged |
| B-11 | T5 | 14.9% | pending |
| B-14 | T5 | 19.3% | surveyed |
| C-02 | T7 | 22.8% | flagged |
faster than the eye
Install
One command — the source lands in your repo. Or copy it from the Code tab.
$ pnpm dlx shadcn@latest add @kinetiq/scroll-smear
Props
| Prop | Type | Default | Description |
|---|---|---|---|
| strength / decay | number | — | Blur length per px/s of scroll and how fast it decays. |
| taps / axis | number · "y" | "x" | — | Blur quality and direction. |