KQ-457 · GLARE/SWEEP
Glare Sweep
A glare on the interface as if it were behind glass under a lamp: a bright band sweeps across the page at an angle set by the pointer, with a soft secondary reflection, and it slides away as the pointer moves. Draws only the glare.
KQ-457 · GLARE/SWEEP
Gaugeworks · calibration sheet
Rig 6 signed off at first light.
Four probes, read against the reference standard before the rig goes back online. The glass over this sheet catches the light exactly like the bench lamp does — move your hand and the glare follows it.
| Probe | Channel | Reading | State |
|---|---|---|---|
| P-01 | Torque arm | 412.6 N·m | nominal |
| P-04 | Bearing temp | 58.2 degC | watch |
| P-07 | Flow rate | 12.04 L/s | nominal |
| P-11 | Vibration | 0.031 g | flagged |
a glare, angled by your hand
Install
One command — the source lands in your repo. Or copy it from the Code tab.
$ pnpm dlx shadcn@latest add @kinetiq/glare-sweep
Props
| Prop | Type | Default | Description |
|---|---|---|---|
| width / intensity / angle | number | — | The band's width in px, its brightness, and its base angle in degrees. |
| secondary | number | — | The strength of the softer second reflection. |